Hours of Operation

Mon – Fri: 7 AM – 4 PM
Sat: 7 AM – 12 PM
Sunday: Closed

Christmas Season

Sat 12/22nd: 7 AM - 12 PM

Closed Sun 12/23rd, Mon 12/24th & Tues 12/25th

Sat 12/29th: 7 AM - 12 PM

Closed Sun 12/30th

Mon 12/31st: 7AM - 12 PM

Closed Tue 1/1st/19

Menoni & Mocogni is an Official Provider of Sakrete Products

Flo-Coat® Concrete Resurfacer

Flo-Coat® Concrete Resurfacer is a polymer modified concrete resurfacing material requiring only the addition of clean potable water. For resurfacing concrete substrates. Can be applied in a flowable consistency using a squeegee, in a stiffer consistency using a trowel or can be sprayed through a hopper gun.

Features:

  • 1/2” down to a featheredge
  • Excellent bond to old concrete no primer needed
  • Open to light foot traffic in 4 hours
  • Interior/exterior applications
  • Can be color pigmented with the Sakrete Cement Colors
  • Superior abrasion resistance
  • Can be used with paper concrete stencils for decorative concrete surfaces.

Use For:

  • Resurfacing concrete slabs
  • Applying a decorative finish to concrete slabs

Stone Veneer Mortar

Stone Veneer Mortar is a high performance, polymer modified mortar designed to set and grout artificial stone and natural stone veneers. Can be used over nearly any solid wall including masonry units, poured concrete or plywood.

Features:

  • High Strength >1,800 psi
  • Meets property requirements of ASTM C1714 and ASTM C270
  • Applications from 3/8” to 1/2” (9.5 to 12.7 mm)
  • Can be color pigmented with the Sakrete Cement Colors

Use For:

  • Setting artificial and natural stone
  • Laying brick or block
  • Scratch and brown coat in stucco applications
  • Above and below grade applications
  • Masonry parge or finish coating
  • Interior or exterior
  • Brick and block tuck pointing

Note: Mortar is only a part of the larger process of installing stone veneer. As such, the information provided here should be used in conjunction with “Installation Guidelines for Adhered Concrete Masonry Veneer” and local building code requirements.

Call Us Today!

Call Now! 847-432-0850

Fast Setting Concrete Mix

Sakrete Fast Setting Concrete Mix is a preblended fast setting mixture of special cementitious materials, sand and coarse aggregate. For projects where a rapid set is needed to allow for same day use. For setting posts and poles without mixing or bracing. For slab placement where concrete thickness exceeds 2”.

Features:

  • High Strength 4,000 psi
  • Full depth applications 2” or greater
  • Ideal for structural applications requiring a small volume of concrete
  • Rapid setting in approximately 1/2 hour resulting in same day use

Use For:

  • Setting fence posts
  • Driveways, slabs, patios, walkways
  • Curbs
  • Stairs
  • Ramps
  • Structural applications requiring a small volume of concrete

High-Strength Cocrete Mix

  • 4,000 psi
  • Full depth applications 2” or greater

Features:

  • High Strength 4,000 psi
  • Full depth applications 2” or greater
  • Ideal for structural applications requiring a small volume of concrete
  • Rapid setting in approximately 1/2 hour resulting in same day use

Use For:

  • Driveways, slabs, patios, walkways
  • Curbs
  • Stairs
  • Ramps
  • Setting fence posts
  • Foundation walls and footings
  • Structural applications requiring a small volume of concrete